Today I could rotate aluminum foil , squire psi wheel which is placed in side the inverted glass bowl.
I practice normal rotation in CCW direction and tried inside bowl. It took 20 min to start motion.
It moved 45 degree in CCW.
21/ 5 /2013
I rotated psi wheel many times in CW and CCW placed in side the glass bowl, placed open to air.
Then I placed psi wheel, inside the Inverted glass bowl, and began to concentrate, on it looking
from top place glass.
At 1:30 pm, I could rotate it about 180 degree.
It took 20 min of concentration, and keeping intention of rotation. I placed both hand around the glass bowl, in contact to outer surface. I have a clear view of the psi wheel. During these 20 min, I was thinking about many things (It is difficult to keep concentration for that long), but related to rotating psi wheel.
After 20 min, psi wheel started slowly but steadily in CCW rotation. It rotated in 180 degree, with out a damping. I was thrilled as it continue rotation. I noticed there is no local wind or any kind of wind sound
from out side the room.
Up to now I have some assumptions about Rotating psi wheel, under Glass bowl :
1. Before starting under bowl practice, rotate psi wheel in open air at least 10 time , continuous in any one direction.
2. You need a clear view of psi wheel, from out side glass bowl. Glass bowl should be clear and plane as possible.
3. You need to wait 20 - 25 min to get a result. During this time no need to over strain, but keep focusing and keep the intension of rotation in mind, as far as possible.
4. Using both hands as you usually use in open air psi wheel rotation.
.
